[lttng-tools,2/6] Fix: tests: error handling inhigh throughput limits test (v2)
diff mbox series

Message ID 20190516190801.16878-2-mathieu.desnoyers@efficios.com
State Accepted, archived
Headers show
Series
  • [lttng-tools,1/6] Improve handling of testSIGTERM/SIGINT (v2)
Related show

Commit Message

Mathieu Desnoyers May 16, 2019, 7:07 p.m. UTC
Each individual call to "tc" should be checked for error, else we
may fail to catch specific tc errors caused, for instance, by a
kernel configuration that only contains some of the required
class modules.

Also, invoke the utils.sh full_cleanup function from the script-specific
interrupt_cleanup trap handler rather than try to perform stopping
of relayd and sessiond within the script.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers at efficios.com>
---
Changes since v1:
- Issue reset_bw_limit when set_bw_limit fails.
---
 .../streaming/test_high_throughput_limits     | 48 ++++++++++++++-----
 1 file changed, 37 insertions(+), 11 deletions(-)

Patch
diff mbox series

diff --git a/tests/regression/tools/streaming/test_high_throughput_limits b/tests/regression/tools/streaming/test_high_throughput_limits
index 32c3f1f2..5945bde7 100755
--- a/tests/regression/tools/streaming/test_high_throughput_limits
+++ b/tests/regression/tools/streaming/test_high_throughput_limits
@@ -41,6 +41,12 @@  if [ ! -x "$TESTAPP_BIN" ]; then
 	BAIL_OUT "No UST events binary detected."
 fi
 
+function reset_bw_limit
+{
+	tc qdisc del dev $DEFAULT_IF root >/dev/null 2>&1
+	return $?
+}
+
 function set_bw_limit
 {
 	limit=$1
@@ -51,28 +57,47 @@  function set_bw_limit
 	# parent qdisc (1:) will always limit us to the right max value
 	dataportlimit=$((9*${ctrlportlimit}))
 
+	diag "Set bandwidth limits to ${limit}kbits, ${ctrlportlimit} for control and ${dataportlimit} for data"
 
 	tc qdisc add dev $DEFAULT_IF root handle 1: htb default 15 >/dev/null 2>&1
+	if [ $? -ne 0 ]; then
+		reset_bw_limit
+		return 1
+	fi
 
 	# the total bandwidth is the limit set by the user
 	tc class add dev $DEFAULT_IF parent 1: classid 1:1 htb rate ${limit}kbit ceil ${limit}kbit >/dev/null 2>&1
+	if [ $? -ne 0 ]; then
+		reset_bw_limit
+		return 1
+	fi
 	# 1/10 of the bandwidth guaranteed and traffic prioritized for the control port
 	tc class add dev $DEFAULT_IF parent 1:1 classid 1:10 htb rate ${ctrlportlimit}kbit ceil ${limit}kbit prio 1 >/dev/null 2>&1
+	if [ $? -ne 0 ]; then
+		reset_bw_limit
+		return 1
+	fi
 	# 9/10 of the bandwidth guaranteed and can borrow up to the total bandwidth (if unused)
 	tc class add dev $DEFAULT_IF parent 1:1 classid 1:11 htb rate ${dataportlimit}kbit ceil ${limit}kbit prio 2 >/dev/null 2>&1
+	if [ $? -ne 0 ]; then
+		reset_bw_limit
+		return 1
+	fi
 
 	# filter to assign control traffic to the 1:10 class
 	tc filter add dev $DEFAULT_IF parent 1: protocol ip u32 match ip dport $SESSIOND_CTRL_PORT 0xffff flowid 1:10 >/dev/null 2>&1
+	if [ $? -ne 0 ]; then
+		reset_bw_limit
+		return 1
+	fi
 	# filter to assign data traffic to the 1:11 class
 	tc filter add dev $DEFAULT_IF parent 1: protocol ip u32 match ip dport $SESSIOND_DATA_PORT 0xffff flowid 1:11 >/dev/null 2>&1
+	if [ $? -ne 0 ]; then
+		reset_bw_limit
+		return 1
+	fi
 
-	ok $? "Set bandwidth limits to ${limit}kbits, ${ctrlportlimit} for control and ${dataportlimit} for data"
-}
-
-function reset_bw_limit
-{
-	tc qdisc del dev $DEFAULT_IF root >/dev/null 2>&1
-	ok $? "Reset bandwith limits"
+	return 0
 }
 
 function create_lttng_session_with_uri
@@ -148,9 +173,9 @@  function validate_event_count
 function interrupt_cleanup()
 {
 	diag "*** Exiting ***"
-	stop_lttng_relayd
-	stop_lttng_sessiond
 	reset_bw_limit
+	# invoke utils cleanup
+	full_cleanup
 	exit 1
 }
 
@@ -168,8 +193,7 @@  skip $isroot "Root access is needed to set bandwith limits. Skipping all tests."
 {
 
 	# Catch sigint and try to cleanup limits
-	trap interrupt_cleanup SIGTERM
-	trap interrupt_cleanup SIGINT
+	trap interrupt_cleanup SIGTERM SIGINT
 
 	BW_LIMITS=(3200 1600 800 400 200 100 50 25)
 	for BW in ${BW_LIMITS[@]};
@@ -177,6 +201,7 @@  skip $isroot "Root access is needed to set bandwith limits. Skipping all tests."
 		diag "Test high-throughput with bandwidth limit set to ${BW}kbits"
 
 		set_bw_limit $BW
+		ok $? "Setting bandwidth limit"
 
 		start_lttng_sessiond
 		start_lttng_relayd "-o $TRACE_PATH"
@@ -185,5 +210,6 @@  skip $isroot "Root access is needed to set bandwith limits. Skipping all tests."
 		stop_lttng_relayd
 		stop_lttng_sessiond
 		reset_bw_limit
+		ok $? "Reset bandwith limits"
 	done
 }